Construction Silicone

LOCATION:Home > Products > Construction Silicone

Liquid Nails

No.:

Description:

*One component Polymer products. *High modules, High intensity, High cohesiveness, and Low flowability. *Can replace nails to bonding and fixing, also called Nail-free glue. *Outstanding performance against climate aging. *Suggest to use und

*One component Polymer products.
*High modules, High intensity, High cohesiveness, and Low flowability.
*Can replace nails to bonding and fixing, also called Nail-free glue.
*Outstanding performance against climate aging.
*Suggest to use under temperature between -20℃~100℃, will be solidification after 48 hours.
*Non-toxic, environmental.
 
Application Guide:
Liquid Nails will bond to many building materials including mirror, baseboard line, billboard, wooden door, Sanitary ware, marble, ceramic, carpet, PVC floor, wall paper etc. 
1.Test the compatibility and adhesion of all the target materials before use this product, don`t construction until the test result is qualified.
2.To ensure that the product has good adhesion, the target material surface must be clean, dry, free of water, dust and oil dirt.
3. Must use non-depilation white cotton cloth and clean solvent (for example, toluene and acetone) to clean the base material surface, applying the liquid nails in one hour to avoid pollution.
4. After extrusion , you can apply the construction technology such as "point form", "straight bar", "wave".
5.You can use tape to cover the material surface after finished gluing, so that to achieve the tidy and beautiful effects.
 
Restriction on Use:
*Not suitable on materials that seep out oil, plasticizer or solvent.
*Not suitable to construction during raining or snowing day.
*Not suitable to begin construction when target material temperature gets lower than 5℃ or surpasses 40℃.
*The amount of the liquid to apply should according to the weight of the target material, suggest to use one sealing rubber strip every 10~30cm. To achieve better cohesion performance, applying the liquid on the edge of the material also.
*After applying the liquid nails, bonding the target materials together, then separate, 3~5 minutes later bonding them again and make sure them firmly stick to each other with a hammer.